3.7 C
New York
Monday, Feb 6, 2023
Image default
Home Improvement

What to Do When Your Home Water Won’t Get Hot

While there haven’t been any recent pandemics, many of us have things to do around the house-time to take care of business. Whether a home improvement or home project or just chores, you’re unlikely to armor up in your protective gear unless you’ve got hot water.

What happens when your home’s water won’t get hot? There’s got to be something wrong, and it’s not the time to ignore it and hope that everything will be fine.

Read on to learn the solutions to stubborn and clogged hot water in the home.

Check the Pilot Light

One of the primary things to check is the pilot light. Pilot lights are used to ignite the burner in water heaters and other types of appliances. It might have gone out, which would cause the water to remain cold.

To check the pilot light, you need to first access the appliances control panel, which is the box with the light. Turn the knob to the pilot setting, and then press and hold the knob while lighting a match and holding it to the pilot opening.

Keep the knob pressed for about one minute, then turn it to the off position. You should see a blue flame in the opening.

Inspect the Elements

For water heater problems, one solution may be to inspect the elements. Inspecting the elements is a simple process that requires only basic tools.

First, unplug the heater and shut off the power at the breaker box. Drain the tank and inspect the two elements for corrosion. If there is any corrosion, these elements will likely need water heater repair or replacement. After inspecting and cleaning the elements, it is essential to ensure that both wires are connected to the terminals.

Lastly, before turning the power back on, ensure to refill the tank with cold water. Following these steps will help bring the hot water back to the home and provide peace of mind that the system is running.

Assess the Thermostat

When your home has no hot water, your first step should be to assess the thermostat. Inspect the settings and ensure the temperature adjustment for the desired level of heat.

If there is no change after you adjust the settings, you should also check that the water heater is turned on and that the circuit breaker or fuse is still in working order.

Identify the Power Supply Issue

When hot water runs out, check that your water heater is plugged in and the circuit breaker is not tripped. If the circuit breaker is tripped, switch it back on and wait a few moments before checking if the hot water is running.

Check if any wiring leading to the water heater is loose or broken. If it is, it will need to be resealed or replaced. If the wiring seems okay, it may mean the water heater itself is malfunctioning, in which case it will need to be serviced or replaced by a professional.

Try These Things When the Water Won’t Get Hot

Proper maintenance of a water heater is essential to ensure a hot water supply. If you find that your hot water won’t get hot, check the water temperature, clean the water heater, and be mindful of the energy efficiency settings.

It is suggested that for technical support and repair services, you contact a professional plumber. Take action today to make sure your hot water runs smoothly and efficiently!

Did you find this article helpful? Check out the rest of our blogs!

Related posts

5 Tips for Listing Your Alexandria VA Home for Sale

VWB Blog

6 Home Maintenance Tips Everyone Should Know

VWB Blog

Everything to Include in Your Modern Kitchen Remodel

VWB Blog